Avadanlıq

NovaPro UHD 3-ü 1-də video nəzarət cihazı

Category:
Description

NovaPro UHD is an all-in-one controller, integrating a software control system with 4K processing and 4K sending. The NovaPro UHD features many cutting edge technologies, and a single unit is able to provide comprehensive control for high end rental and other applications, simplifying operation while increasing the value of the display

Specifications

 

Input
ConnectorQuantityDescription
12G-SDI4Supports ST-2082-1 (12G), ST-2081-1 (6G), ST-424 (3G) and ST-292 (HD) standard video inputs. Input resolutions up to 4K×2K@60Hz and downward compatible Supports 12G-SDI output with loop-through. Note: When the input source is a 12G-SDI signal, you must use CANARE / L-4.5CHD+ / UHDTV-SDI SDI cables and the cable length should be less than 50 m. 12G-SDI connectors 1, 2 and 3 DO NOT support the deinterlaced function, but connector 4 supports the function.
DP 1.21
  • Input resolutions up to 4K×2K@60Hz (8K×1K@60Hz) and downward compatible.
  • Supports HDCP 1.3.
  • DOES NOT support interlaced signal inputs.
HDMI 2.01
  • Input resolutions up to 4K×2K@60Hz (8K×1K@60Hz) and downward compatible
  • Supports HDCP 1.4 and HDCP 2.2.
  • DOES NOT support interlaced signal inputs. Supports HDMI 2.0 output with loop-through.
HDMI 1.34
  • D_4×HDMI 1.3 input card by default
  • Input resolutions up to 1920×1080@60Hz Supports HDCP 1.3.
  • Supports interlaced signal inputs.
  • The HDMI input card can be replaced by a D_4×DVI input card.
Output
ConnectorQuantityDescription
Ethernet port16Gigabit Ethernet output ports

  • Maximum loading capacity: 8.8 million pixels
  • Maximum width: 8192 pixels
  • Maximum height: 8192 pixels
OPT 1–4410G fiber optical output ports (copy and hot backup)

  • OPT 1 transmits data on Ethernet ports 1–8.
  • OPT 2 transmits data on Ethernet ports 9–16.
  • OPT 3 is the copy/hot backup channel for OPT 1.
  • OPT 4 is the copy/hot backup channel for OPT 2.
MVR1HDMI 1.3 connector A Multiviewer connector to monitor the input source, PVM, PGM or perform mixed monitoring
AUX1HDMI 1.3 connector An auxiliary output connector for connecting an auxiliary device, such as a teleprompter
Control
ConnectorQuantityDescription
ETHERNET1For PC communication or network connection
USB3
  • 1 × USB (Type-B): Connect to the PC for device debugging.
  • 2 × USB (Type-A):
    • Insert a USB drive to perform system update.
    • Connect a mouse or keyboard.
    • Output connector for device cascading
GENLOCK IN-LOOP1Connect a synchronization signal source to synchronize the cascaded devices.
CONTROL UI1Connect to a monitor for displaying the user interface of the embedded Master VI software.